, , , , ,

Mach3 Breakout Board 5 Axes For CNC

Availability:

Out of stock


About this item

  • Maximum support 5-axis stepper motor driver controllers.
  • Supports MACH3, EMC2, KCAM4 software.
  • Equipped with 4-wire limit switch to insure safety movement.
  • It is with relay port to control the CNC spindle.

 1,350

Out of stock

Compare

Mach3 CNC Breakout Board Description:

Mach3 CNC Breakout Board Card 5 Axis One-way relay output port can control the spindle switch with Parallel Port With out Cable in Pakistan.

1. Fully support for MACH3 and other computer software that supports parallel port control.
2. USB power supply and peripheral power supply are separated to ensure computer security.
3. 12-24V wide peripheral voltage input, with anti-reverse connection function.
4. All input signals are isolated by optical coupling, and can be connected to emergency stop, tool setting, limit, etc.
5. One-way relay output port can control the spindle switch. The output port is P17 port.
6. One-way optocoupler isolated 0-10V analog voltage output can control the inverter with the corresponding analog interface to control the spindle speed. The output port is the P1 port.
7. Open all 17 ports, can be connected with optocoupler drive, can control 5-axis stepper motor.
8. P1 acts as a PWM output and can control the spindle governor with optocoupler input.
9. Can be connect to the common cathode/anode drive with input level of 5V.

Specification:
Input voltage range: 12-24VDC
Package weight: Approx. 335g/11.8oz

Mach3 CNC Breakout Board 5 Axis Card in Pakistan Mach3

 

Mach3 CNC Breakout Board Features:

– 5 axis breakout board for CNC stepper driver controller.
– Maximum support 5-axis stepper motor driver controllers.
– Supports MACH3, EMC2, KCAM4 software.
– Equipped with 4-wire limit switch to insure safety movement.
– It is with relay port to control the CNC spindle.
– Comes with DB25 male to female cable and USB 2.0 cable.
– It can get power from PC through USB port.
– Working Voltage: DC 5V.en.wikipedia.org

MACH 3 board with parallel port in Green color but cable is not include with board

  • Maximum support 5-axis stepper motor driver controllers.
  • Supports MACH3, EMC2, KCAM4 software.
  • Equipped with 4-wire limit switch to insure safety movement.
  • It is with relay port to control the CNC spindle.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Mach3 Breakout Board 5 Axes For CNC”

There are no reviews yet.