, , ,

L293D Motor Driver Shield/Expansion Board For UNO R3


About

  1. L293D DC Motor Drive Shield
  2. Stepper Motor Drive Shield
  3. Expansion Board for Arduino
  4. .4-way H-bridge:
  5. The L293D chip provides 0.6A (peak 1.2A) current per bridge

 390

Compare

L293D Motor Driver Shield Description:

1. to 4 bidirectional DC motors and 4 PWM speed controllers (approximately 0.5% resolution)
2. Up to 2 stepper motor forward and reverse control, single / double step control, stagger or micro-step and rotation angle control, L293D Motor Driver Shield H Bridge Shield For UNO R3 in Pakistan
3. 4-way H-bridge: The L293D chip provides 0.6A (peak 1.2A) current per bridge with thermal shutdown protection, 4.5Vto36V
4. The pull-down resistor ensures that the motor remains stop at power-up
5. Large terminal blocks make wiring easier (10-22AWG) and power
6. With reset button
7. 2 large terminal external power terminals, to ensure logic and motor drive power separation
8. Download Easy to use software library for rapid project development

L293D Motor Driver Shield About

Multi-Motor Driver Shield (2-L293D) – Four H-Bridges: Two L293D Motor driver chips – L293D is rated at 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. – Motor Voltages from 4.5VDC to 16VDC. (up to 36V if C6 and C7 are upgrade) – Up to 4 bi-directional DC motors with individual 8-bit speed selection (256 speeds) – Up to 2 stepper motors (unipolar or bipolar) – Pull down resistors keep motors disabled during power-up – Separate Logic and Motor power connections – Terminal block connectors for motors and power – 2 connections for 5V ‘ servos en.wikipedia.org  

A H-bridge is an electronic circuit that switches the polarity of a voltage apply to a load. These circuits are often use in robotics and other applications to allow DC motors to run forwards or backwards. The name is derive from its common schematic diagram representation, with four switching elements configure as the branches of a letter “H” and the load connected as the cross-bar.

Most DC-to-AC converters (power inverters), most AC/AC converters, the DC-to-DC push–pull converter, isolated DC-to-DC converter, most motor controllers, and many other kinds of power electronics use H bridges. In particular, a bipolar stepper motor is almost always driven by a motor controller containing two H bridges.

 

 

 

Technical Specifications

Brand Apple
Item Height 18 Millimeters
Item Width 31.4 Centimeters
Screen Size 13 Inches
Item Weight 1.6 Kg
Product Dimensions 21.9 x 31.4 x 1.8 cm
Item model number MF841HN/A
Processor Brand Intel
Processor Type Core i5
Processor Speed 2.9 GHz
RAM Size 8 GB
Hard Drive Size 512 GB
Hard Disk Technology Solid State Drive
Graphics Coprocessor Intel Integrated Graphics
Graphics Card Description Integrated Graphics Card
Hardware Platform Mac
Operating System Mac OS
Average Battery Life (in hours) 9

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “L293D Motor Driver Shield/Expansion Board For UNO R3”

There are no reviews yet.

You may also like…