FNIRSI HRM-10 Battery Tester for Battery Inspection

The FNIRSI HRM-10 Battery Tester combines voltage and internal resistance measurement in a handheld instrument. It displays both readings together, helping you record and compare batteries during inspection.

For electronics technicians, battery project builders, and laboratory users in Pakistan, it provides a practical tool for repeatable testing. Use consistent test conditions and appropriate reference values when comparing results.

Four-Wire Kelvin Measurement

The HRM-10 uses a four-wire Kelvin connection method to reduce the influence of test lead and contact resistance. This is particularly useful when measuring low resistance values.

Good connections still matter. Position the supplied test contacts correctly and keep the battery terminals clean to obtain consistent readings.

Automatic Ranges and Battery Sorting

Automatic ranging simplifies routine measurements, while manual range selection provides additional control. The sorting mode compares readings against limits set by the user.

You can use these limits to organise batteries according to your project requirements. However, pass or fail results depend on the thresholds selected; they are not a universal assessment of battery condition.

Measurement Records

Historical records and data export help you organise test results. These functions are useful when comparing multiple batteries or maintaining inspection records.

Record the battery type and test conditions alongside the measurements. This makes later comparisons easier to interpret.

Applications of the FNIRSI HRM-10 Battery Tester

• Comparing compatible rechargeable cells.
• Recording battery voltage and internal resistance.
• Screening batteries against defined acceptance limits.
• Electronics workshop testing.
• Educational battery measurement experiments.

Internal resistance and voltage provide useful information, but they do not directly measure usable battery capacity. A separate capacity or load test may be needed for a fuller assessment.

Product Specifications

Testing and Connection Limits

Follow the manual when connecting the test leads. Do not apply external AC voltage or exceed the 100V DC input limit. The internal AC test signal does not mean the meter accepts an AC voltage source.

Buy FNIRSI HRM-10 in Pakistan

Choose the FNIRSI HRM-10 Battery Tester from Mekatroniks for battery inspection and measurement work. Check the supplied version and included test accessories before ordering.