Sensing distance 2-40 cm, distance, good anti-jamming capability. (Note: The infrared sensor can not detect all            objects get the same distance, objects of different colors of light reflectance of different objects closer darker                 black shorter distance detected, the sensor 2-40 cm is measured against the white wall of)
Speed, suitable for smart car obstacle avoidance, black and white line tracking, anti-drop, product counters,                 cutting lines, liquid level detection.
This sensor is made with black and white lines tracing the car ran without black line on white paper,                           available in concrete The yellow complex environment such as the black line patrol track. As long as the black               line around the slightly lighter color than black can, eliminating the traditional moves, so that environmental               layout easier.
The sensor 3 to 6V supply, wide range, suitable for 3V and 5V MCU system.
With Enable, EN terminal is equal to “1” when the sensor does not work, equal to “0” when working. Jump on              the sensor end cap long after the EN grounding plug (EN long as “0”). To use the EN pin when the jumper cap              is removed.
Frequency adjustment potentiometer is used to adjust the carrier frequency of the infrared emission tube,                      because the integration receiver 38KHZ in particular when the carrier frequency is the most sensitive. The                    502 , resistor clockwise transferred do (that is, the launch tube at maximum brightness), and then at a white                  wall tone 103 resistance, has been transferred to the sensing distance is the farthest so far so that the sensor                   will work in the best state
Working voltage: DC 3.3V-5V
Working current: 20mA
Working temperature: -10degree+50degree
Detection distance : 2-40cm
IO interface: 4 line (-/+/S/EN)
Output signal: TTL Level
Adjusting mode: Multi resistance regu