Support boot voltage detection function ,  Item Type: Transistor Tester with case
Material: Plastic
Color: As Pictures Shown ,Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFETs, diodes (including dual diodes), thyristors, triodes, resistors, and capacitors. Automatically testing the component leads and displaying them on the LCD

2. The forward bias voltage of the emitter transistor can be determined by detecting the amplification factor and base number of a transistor, a MOSFET protection diode, and the like

3. Measure gate threshold voltage and gate capacitance MOSFET ,The display uses 12864  LCD (128 * 64 characters)

4. High test speed, valid component test: In 2 seconds (except in larger capacitors, large capacitance measurement also takes a long time, the measurement time in 1 minute is normal),One-button operation, power-on test.

5. Power Consumption Shutdown Mode: Less than 20 nA, Automatic shutdown function can avoid unnecessary waste, save battery energy and improve battery life.

Digital 128*64 LCD display for easy readings, can display measured data and graphics.

Short detection time: only 1.7 seconds. It is normal to take 1 minute for bulk capacitor detection

Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, triodes, resistors, capacitors or other devices

Use 9V battery(not included), can also use DC power(DC 6.8-12V). Automatic shutdown, shutdown current is only about 20nA.

Measure the gate threshold voltage and gate capacitance of the MOSFET, Measure bipolar transistor current amplification factor and base-emitter threshold voltage

LCR T4 Component Tester Meter LCR Graphic Tester

Note: Please make sure that capacitors are discharged before testing.
Test ranges:
Inductors, capacitors ,diodes, dual  diode , transistor, SCR ,the regulator, LED tube, ESR, Resistance
Resistance :0.1 ohm resolution, maximum 50M ohm
Capacitor :25pf -100,000 uf
Inductors : 0.01mh-20H

en.wikipedia.org