XH-W3001 DC12V Temperature Controller DC12v Digital Thermostat LED Thermometer Controller Switch W3001

Temperature Controller W3001 12V

Description:

Temperature measurement range: – 50 ~ 110°C Temperature control range: – 50 ~ 110°C

measuring accuracy: plus or minus 0.2 °C

control precision: plus or minus 0.1 °C

Measuring input: NTC10K L = 1 meters waterproof probe Input power: according to the classification of choice

Output power: according to the classification of choice

Appearance size: 60 * 45 * 31 mm

This Temperature Controller come with 1meter waterproof sensor

Feature: Heating/refrigeration modes, users can set the start/stop temperature freely; With large and clear LED display for better readability

Temperature Controller W3001 12V

Easy to use: Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time.  Two Work Mode :Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature)

Application: Waterproof sensor, can be used to detect water or other liquid non-corrosive. objects temperature, for aquaculture, ornamental fish and other Operation Instructions:

Set the start temperature; press the up button on one time to show the starting temperature, press the upper key for about 3 seconds, start temperature and digital flicker, and set the required temperature value through the upper and lower keys.

Set the stop temperature: press the next button to show the stop temperature, press the key for about 3 seconds, stop the temperature, and digitally flicker, and check the required temperature value through the upper and lower keys.

Restore factory setting: under the condition of electricity, at the same time hold down the upper and lower keys, the digital tube display 888 then automatically jump to the detection temperature, can restore the factory setting;     en.wikipedia.org