PMS5003 Air Quality Sensor Module – PM2.5 Laser Dust Sensor

✓ In stock
Availability:

10 in stock


The PMS5003 Air Quality Sensor uses laser scattering to estimate airborne particulate concentrations. It reports PM1.0, PM2.5 and PM10 readings through UART, making it suitable for compatible Arduino, ESP32 and Raspberry Pi monitoring projects. The sensor requires a 5V supply and uses 3.3V logic signals.

₨ 4,300

10 in stock

 

 

PMS5003 Air Quality Sensor Module

The PMS5003 Air Quality Sensor is a digital laser dust sensor for measuring airborne particulate matter. It reports estimated mass concentrations for PM1.0, PM2.5 and PM10, allowing your project to display and record changes in particle levels over time.

Use it to build an indoor particulate monitor, a connected dashboard or a student environmental monitoring project.

Laser Particle Detection

The sensor uses laser scattering to detect particles passing through its sampling chamber. Its digital output provides particulate concentration readings in micrograms per cubic metre (µg/m³).

These readings describe particulate matter. The PMS5003 does not measure gases such as carbon dioxide or carbon monoxide.

UART Interface for Microcontrollers

Read measurements over UART serial communication using a compatible controller and sensor library. The standard serial configuration is 9600 baud, 8 data bits, no parity and one stop bit.

Keep the power and signal requirements separate: the sensor uses a 5V power supply, while its communication interface uses 3.3V logic. Match the controller’s signal levels before connecting it.

Monitoring Projects in Pakistan

Build a home or classroom display that logs changes in airborne particles throughout the day. An ESP32-based project can send readings to a local dashboard, while a display can show the latest values directly.

Keep the air inlet and outlet unobstructed when designing an enclosure. For an outdoor installation, provide suitable protection while preserving airflow to the sensor.

Product Specifications

SpecificationDetails
ModelPMS5003
ManufacturerPlantower
Detection principleLaser scattering
Reported particulate measurementsPM1.0, PM2.5 and PM10
Concentration unitsµg/m³
Communication interfaceUART
Serial configuration9600 baud, 8N1
Supply voltage5V DC
Communication logic level3.3V
Typical applicationsParticulate monitors, environmental data loggers and IoT dashboards

Buy PMS5003 Air Quality Sensor in Pakistan

Shop the PMS5003 Air Quality Sensor at Mekatroniks for particulate monitoring and embedded electronics projects. Pair it with a compatible controller and display to build a monitor for your home, workspace or university project.

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PMS5003 Air Quality Sensor Module – PM2.5 Laser Dust Sensor”

There are no reviews yet.