Desoldering Pump – Solder Sucker is a manual spring-loaded tool for removing molten solder during electronics repair and PCB rework.

Proskit Desoldering Pump – Solder Sucker

Remove unwanted solder during electronics repair with the Proskit desoldering pump. This hand-operated solder sucker draws up solder after it has been melted with a soldering iron. It is a useful addition to a workbench for PCB rework, component replacement and DIY electronics projects.

Why use a desoldering pump?

When removing a soldered component, leftover solder can make it difficult to free its leads or clear a PCB hole. A manual desoldering pump lets you position the nozzle close to the heated joint and draw away molten solder. Repeat the process as needed until the connection is clear.

Common uses

• Removing solder from through-hole component joints
• Clearing solder while replacing connectors or components
• PCB repair, prototyping and electronics maintenance
• Student and DIY electronics projects

How to use

1. Press the pump’s plunger to prepare it.
2. Heat the solder joint with a suitable soldering iron until the solder melts.
3. Place the pump nozzle close to the molten solder and press the release button.
4. Let the joint cool, then check whether more solder needs to be removed.
5. Empty and clean the pump according to the supplied product instructions.

Shop the Proskit desoldering pump at Mekatroniks in Pakistan for your soldering and electronics repair work.

Key Features

• Strong manual suction action
• Spring-loaded mechanism
• Handheld and reusable design
• Useful for PCB repair and component removal

Applications

Ideal for hobbyists, technicians and electronics repair work when removing solder from component joints and through-holes.