KY-016 RGB DIP Module Description:
KY-016 RGB DIP Module ,to form a color with RGB, three light beams (one red, one green, and one blue) must be superimposed (for example by emission from a black screen or by reflection from a white screen). Each of the three beams is called a component of that color, and each of them can have an arbitrary intensity, from fully off to fully on, in the mixture.
type: LED Board Module
1. Using 5050 full color LED.
2. RGB tricolor current一limiting resistance to prevent burn out.
3. Through the PWM adjusting three primary colors can be mix to obtain different colors.
4. With a variety of single一chip interface.
5. Working Voltage: 5V.
6. LED Drive Mode: Common cathode driver.
- 3 Colors RGB LED Sensor Module
- Use plug-in full-color LED\
- Operating voltage: 5V
- LED drive mode: common cathode drive
KY-016 RGB DIP Module About RGB
KY-016 RGB DIP Module. The RGB color model is an additive color mode, in which the red, green and blue primary colors of light are add together in various ways to reproduce a broad array of colors. The name of the model comes from the initials of the three additive primary colors, red, green, and blue.
The main purpose of the RGB color model is for the sensing, representation, and display of images in electronic systems, such as televisions and computers, though it has also been use in conventional photography. Before the electronic age, the RGB color model already had a solid theory behind it, base in human perception of colors.
RGB is a device-dependent color model: different devices detect or reproduce a given RGB value differently, since the color elements (such as phosphors or dyes) and their response to the individual red, green, and blue levels vary from manufacturer to manufacturer, or even in the same device over time. Thus an RGB value does not define the same color across devices without some kind of color management.