The Raspberry Pi Pico series is a range of tiny, fast, and versatile boards built using RP2040, the flagship microcontroller chip designed by Raspberry Pi

Raspberry Pi Pico RP2040

The Raspberry Pi Pico Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging, making it easy to use a Raspberry Pi Pico with non-Raspberry Pi platforms such as Windows and Mac, and with typical Linux computers.

Raspberry Pi Pico Specification

• 21 mm × 51 mm form factor
• RP2040 microcontroller chip designed by Raspberry Pi in the UK
• Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
• 264kB on-chip SRAM
• 2MB on-board QSPI flash
• 2.4GHz 802.11n wireless LAN (Raspberry Pi Pico W and WH only)
• Bluetooth 5.2 (Raspberry Pi Pico W and WH only)
• 26 multifunction GPIO pins, including 3 analogue inputs
• 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 8 × Programmable I/O (PIO) state machines for custom peripheral support
• Supported input voltage 1.8–5.5V DC
• Operating temperature -20°C to +85°C (Raspberry Pi Pico and Pico H); -20°C to +70°C (Raspberry Pi Pico W and Pico WH)
• Castellated module allows soldering direct to carrier boards (Raspberry Pi Pico and Pico W only)
• Drag-and-drop programming using mass storage over USB
• Low-power sleep and dormant modes
• Accurate on-chip clock
• Temperature sensor
• Accelerated integer and floating-point libraries on-chip