, ,

Arduino UNO R3 SMD


UNO R3 SMD Board ATmega328P with USB Cable compatible with Arduino IDE Projects.

1,400

Product description:

  • This is UNO R3 ATmega328P CH340G USB Driver Development Board, and it is an SMD
  • It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button
  • It contains everything needed to support the micro-controller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
  • Microcontroller: SMD (Surface Mount Chip)
  • Microcontroller : Atmega328p. USB to UART converter : CH340G
  • This UNO R3 uses surface mount version of the Atmega328P instead of the through-hole version. the board is based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    Microcontroller: ATmega328
    Operating Voltage 5V
    Input Voltage (recommended): 7-12V
    Input Voltage (limits): 6-20V
    Digital I/O Pins: 14 (of which 6 provide PWM output)
    Analog Input Pins: 6
    DC Current per I/O Pin: 40 mA
    DC Current for 3.3V Pin: 50 mA
    Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
    SRAM: 2 KB (ATmega328)
    EEPROM: 1 KB (ATmega328)
    Clock Speed: 16 MHz

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Arduino UNO R3 SMD”

There are no reviews yet.