, ,

STM32F103C8T6 ARM Development Board in Pakistan

About this Item:

  1. The Board lead to all the I/O resources.
  2. Board of MCU-based basic circuits, such as a crystal oscillator circuit
  3. USB interface and USB power management circuits, and so on.
  4. Use the current smart phones of Micro USB interface, easy to use.
  5. USB communication and power supply can be done.
  6. Equipped with high quality 1*40/2.54mm spacing of single rows of pins.
  7. Ensuring excellent conductive contact



STM32F103C8T6 ARM Development Board

STM32F103C8T6 ARM Development Minimum System Board Module with unsold header pins STM32F103C8T6 Core Learning Board Domestic Chip in Pakistan.
100% Brand new and high quality!
Minimum System Development Board Module For Arduino Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
4-16MHz crystal.
Size: 5.3cm x 2.2cm

STM32 is a family of 32-bit microcontroller integrated circuits by STMicroelectronics. The STM32 chips are grouped into related series that are based around the same 32-bit ARM processor core, such as the Cortex-M33F, Cortex-M7F, Cortex-M4F, Cortex-M3, Cortex-M0+, or Cortex-M0. Internally, each microcontroller consists of the processor core, static RAM, flash memory, debugging interface, and various peripherals.

STM32F103C8T6 ARM Development Board About

STM32 board Blue Pill is a Development board for the ARM Cortex M3 Microcontroller. It looks very much similar to the Arduino Nano but it packs in quite a punch. The Development board is shown below.

These boards are extremely cheap compared to the official Arduino boards and also the hardware is open source. The microcontroller on top of it is the STM32F103C8T6 from STMicroelectronics. Apart from the Microcontroller, the board also holds two crystal oscillators, one is an 8MHz crystal, and the other is a 32 KHz crystal, which can be used to drive the internal RTC (Real Time Clock). Because of this, the MCU can operate in deep sleep modes making it ideal for battery operated applications.

Since the MCU works with 3.3V, the board also houses a 5V to 3.3V voltage regulator IC to power the MCU. Even though the MCU operates at 3.3V most of its GPIO pins are 5V tolerant. The pin of the MCU are neatly pulled out and labelled as header pins. There are also two on-board LEDs, one (red color) is used for power indication, and the other (green color) is connected to the GPIO pin PC13. It also has two header pins which can be used to toggle the MCU boot mode between programming mode and operating mode


Additional Features

Sound Audio
Batteries 4x AAA
Series Mega 2
Max Bass 10 Levels
Inputs 3.5mm minijack

Based on 0 reviews

0.0 overall

Be the first to review “STM32F103C8T6 ARM Development Board in Pakistan”

There are no reviews yet.