Desoldering Wick 1.5m Mechanic

Mechanic Desoldering Wick 1.5m helps remove unwanted solder during electronics repair and soldering projects. Also known as solder wick or desoldering braid, it absorbs molten solder when heated with a soldering iron. This makes it useful for clearing PCB pads, removing solder bridges and preparing connections for fresh solder.

At Mekatroniks, this solder removal tool is a practical addition to the workbench of students, hobbyists and electronics repair technicians in Pakistan.

Clean Excess Solder from Pads and Joints

Excess solder can connect nearby pads or leave uneven connections. Desoldering braid helps remove this buildup so you can inspect the area and continue your repair.

For example, you can use it to clean solder from component leads before replacement. It also helps remove solder bridges between closely spaced connections during careful PCB rework.

Key Features

• 1.5-metre length: Cut small sections as needed for individual repair tasks.
• Braided construction: Draws molten solder into the braid through capillary action.
• Controlled solder removal: Useful for cleaning selected pads and joints.
• PCB rework applications: Helps prepare soldered areas for component replacement.
• Workbench accessory: Use alongside a soldering iron and suitable electronics flux.

Common Applications

Desoldering Wick 1.5m can be used for:

• Removing excess solder from PCB pads.
• Clearing solder bridges between component leads.
• Cleaning connections during component replacement.
• Preparing pads during SMD and BGA rework.
• Repairing soldering mistakes in educational electronics projects.

For BGA work, the braid assists with pad cleanup as part of a suitable rework process. It does not replace the equipment required to remove or install a BGA component.

How to Use Desoldering Wick

1. Place a fresh section of braid over the solder you want to remove.
2. Apply suitable electronics flux if needed.
3. Place the heated soldering iron tip onto the braid.
4. Allow the solder to melt and flow into the braid.
5. Lift the iron and braid together while the solder is still molten.
6. Cut off the used section before working on another joint.

Avoid pressing hard or heating one area for too long, as this can damage PCB pads. Let the used braid cool before handling it.

Desoldering Wick 1.5m Mechanic Specs…

Package Includes

1 × Desoldering Wick, 1.5m length

Choose Desoldering Wick 1.5m from Mekatroniks for your electronics repair kit in Pakistan.