,

DSO150 Digital Oscilloscope kit Fully Assembled With Probe

Availability:

4 in stock


About

  1. DIY Electronic Kits Assembled With Probe
  2. Mini DSO150 Digital Oscilloscope
  3. 2.4 inch LCD Display.
  4. Assembled in China

 8,200

4 in stock

Compare

DSO150 Digital Oscilloscope kit Description

DSO150 Digital Oscilloscope kit Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included. Assembled in China

  •  (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation
  • We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on Mekatroniks website
  • Counterfeit versions of this product are available 
  • Size:110*75*25mm(4.3*2.95*0.98) The highest real-time sampling rate: 1Msps
    Precision: 12Bit
    Sampling buffer depth: 1024 bytes
    Analog bandwidth: 0-200KHz
    Vertical sensitivity: 5mV/Div – 20V/Div (according to the 1-2-5 way)
    Adjustable vertical displacement, with instructions
    Input impedance: 1MΩ
    Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
    Coupling methods include DC/AC/GND
    Horizontal time base range: 10μs/Div-50s/Div (increase by 1-2-5)
    With automatic, conventional and single trigger modes, it is convenient to capture instant waveforms
    Can be triggered by rising or falling edge
    Trigger level position is adjustable, with indication Observe the waveform before the trigger (negative delay)
    Freeze the waveform display at any time (HOLD function)
    Comes with 1KHz /3.3V square wave test signal source
    With digital display of waveform parameters, the parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, effective value Save/recall the waveform, the waveform does not disappear when turned of

DSO150 Digital Oscilloscope kit

 Digital Oscilloscope kit Specifications:

DSO Shell Features:

  • Analog bandwidth: 0 – 200kHz
  • Sampling rate: 1Msps max
  • Sensitivity: 5mV/Div – 20V/Div
  • Sensitivity error: < 5%
  • Vertical resolution: 12-bit
  • Time base: 10us/Div – 500s/Div
  • LCD: 2.4″ color TFT LCD, 320 x 240
  • Record length: 1024 points
  • Built-in 1kHz/3.3V test signal
  • Hold function 
  • Save/recall waveform function
  • MPORTANT: 9V DC input power is required.en.wikipedia.org DO NOT EXCEED 10V! If using a wall wart, test the actual output before powering your scope. It WILL permanently damage your scope to use higher voltages! We’re sorry for yelling. But it is important.

Specifications:
• Maximum real-time sampling rate: 1 MSa/s
• Analog bandwidth: 0 – 200 KHz
• Sensitivity range: 5 – 20 mV/div
• Maximum input voltage: 50 Vpk (1X probe)
• Input impedance: 1M ohms/20pF
• Accuracy: 12 bits
• Record length: 1024 points
• Coupling modes: DC / AC / GND
• Time Base Range: 500s/Div – 10us / Div
• Trigger modes: Auto, normal, and single
• Trigger position: Center of buffer
• Supply voltage: DC 9 V (8 – 10 V)
• Current consumption: ~120 mA @ 9 V
• Main board size: 94 x 65 mm (3.7 x 2.56 in)
• Analog board size: 65 x 47 mm (2.56 x 1.85 in)
• Screen size: 52 x 40 mm (2 x 1.57 in)
• Package size: 14.5 x 10 x 3.7 cm (5.7 x 3.94 x 1.45 in)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DSO150 Digital Oscilloscope kit Fully Assembled With Probe”

There are no reviews yet.

You may also like…