,

Mini USB Blaster Altera Programmer for CPLD FPGA NIOS JTAG


About this item

100% band new and high quality. Fully compatible with original Altera USB-Blaster. Supported target voltage : 1.0V-5.5V. Support all ALTERA device.

Support:JTAG, AS, PS Mode. Support Nios II embedded core based debug. Supports Quartus II Signal Tap? II Logic Analyzer (for logic analysis). High performance, 6 times faster than Byte Blaster II. USB interface with status and Power LED.

 1,400

Compare

Mini USB Blaster Altera Programmer Description:

USB Blaster Mini Programmer Debugger USB interface

  • FPGA/CPLD download
  • Signal Tap II embedded logic analyzer
  • NIOS II debug mini USB programmer.1. Support 1.5V,1.8V,2.5V,3.5V and 5.0V.2. Support all ALTERA products : CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, Stratix II, Cyclone, Cyclone II, ACEX 1K, APEX20K and FLEX 10K ) ;Active serial configuration device (EPCS1, EPCS4, EPCS16)

    —- Now we have tested chip using this tool is: Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5, EP2C8, EP2C35) ; Stratix (EP1S10, EP1S20, EP1S25) ; Stratix II(EP2S60) ; FLEX10K(EPF10K10, EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84, MAX7128) ; AETC100(MAX3000, MAX3128) ; MAXII(MAXII240, MAXII570, MAXII1270) ; EPCS(EPCS1, EPCS4, EPCS16) ; EPC(EPC1, EPC4)

    3. Support AS, PS and JTAG program ( with Verify and Bank Check function) .

    —- When we tested the chip above , we use the different program mode: JTAG ( Cyclone, CycloneII, Stratix II, Flex10K, Acex1K, Max7000 and Max3000) ; AS ( EPCS1, EPCS4, EPCS16 ) ; PS ( Stratix , Stratix GX )

    4. Embedded logic analyzer function of Signal Tap II

    5. Support NIOS II communication and debugger– When you use it to debug your Black Gold , it will not Pop-up warning

    6. Faster — about 6 times than Byte blasterII

    7. USB interface ! — you don\’t need a PC with serial port now

    8. 100% compatible with Official ALTERA USB Blaster

Mini USB Blaster Altera Programmer FEATURES:

Compatible with Altera USB blaster:

USB Blaster Mini Programmer Debugger.
CPLD: MAX3000, MAX7000, MAX9000, MAXII…
FPGA: Stratix ,  Stratix II, Stratix III, Stratix IV, Cyclone, Cyclone II, Cyclone III, Cyclone IV, ACES1K, APEX20k, FLEX10K..
Active serial configuration device:

EPCS1, EPCS4, EPCS16, EPCS64…
AS, PS and JTAG mode
Signal Tap II embedded logic analyzer
NIOS II debug* USB interface
Quartus II 4.0 and above version
Windows XP, windows Vista, Windows 7 and Linux Windows 10.

PACKAGE LIST:

  • USB BLASTER Programmer x1
  • 10-Pin JTAG Connection Cable x1
  • USB cable x1
  • USB Blaster Mini Programmer.

    Brand new and high quality.
    Uses original Altera USB Blaster Mini Programmer.

  • en.wikipedia.org
  • 100% band new and high quality. Fully compatible with original Altera USB-Blaster. Supported target voltage : 1.0V-5.5V. Support all ALTERA device.
  • CPLD:MAX 3000A、MAX 7000A、MAX 7000B、MAX 7000S、MAX 9000、MAX 9000A and MAX II. FPGA:Stratix、Stratix II、Stratix GX、Cyclone、Cyclone II、Cyclone III、ACEX 1K、APEX II、APEX 20K、APEX 20KE、APEX 20KC、FLEX 10K、FLEX 10KE、FLEX 10KA、FLEX 6000、FLEX 8000、EPCS1、EPCS4、EPCS16、EPCS64EPC1、EPC4、EPC8、EPC16.
  • Support:JTAG, AS, PS Mode. Support NiosII embedded core based debug. Supports Quartus II SignalTap? II Logic Analyzer (for logic analysis). High performance, 6 times faster than Byte BlasterII. USB interface with status and Power LED.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Mini USB Blaster Altera Programmer for CPLD FPGA NIOS JTAG”

There are no reviews yet.

You may also like…