No products in the basket.
Special Offer
- Robotic Arm, Robotic Car, Robotics, Servo Motors
DS3218 20KG Metal Gear Servo Motor
The DS3218 20KG Servo Motor is a digital metal gear servo for robotic arms, grippers and RC steering. It uses a PWM control signal to move to a commanded position. Check whether you need the 180° or 270° version before ordering.
SKU: n/a - Converters, Programmers, Programmers & Microcontroller
ZK-PP1K PWM Signal Generator Module – Dual Mode, 1Hz–150kHz
Converters, Programmers, Programmers & MicrocontrollerZK-PP1K PWM Signal Generator Module – Dual Mode, 1Hz–150kHz
The ZK-PP1K PWM Signal Generator is a dual-mode module with an LCD and a 3.3V–30V DC supply range. Use PWM mode to adjust frequency and duty cycle, or switch to Pulse mode to set the output delay, high and low pulse widths, and pulse count.
SKU: n/a - Accessories, Robotic Car, Robotics
Mini Car Wheel 43mm for N20 DC Gear Motor
Build a compact robot car with this 43mm mini car wheel for N20 DC gear motors. It suits small chassis, line follower robots and student projects. Check that the wheel hub matches your motor’s output shaft before ordering.
SKU: n/a - ESP & IOT, Wifi Modules, Wireless & Communication, Wireless Modules
ESP32-S3-WROOM-1 N16R8 44-Pin Development Board – Soldered Headers
ESP & IOT, Wifi Modules, Wireless & Communication, Wireless ModulesESP32-S3-WROOM-1 N16R8 44-Pin Development Board – Soldered Headers
The ESP32-S3 N16R8 is a 44-pin development board with pre-soldered headers. Its ESP32-S3-WROOM-1 module provides 16 MB flash, 8 MB PSRAM, 2.4 GHz Wi-Fi, and Bluetooth 5 Low Energy. Use it for wireless sensors, robotics, and embedded display projects.
SKU: n/a - LCD, LCD Display & Lights
2.8-Inch SPI TFT Display Module 240×320 – Non-Touch
The 2.8 Inch SPI TFT Display provides a 240×320-pixel colour screen for compatible microcontroller projects. Its SPI interface supports display communication, while the non-touch design suits interfaces controlled by buttons, keypads, or rotary encoders. Confirm the display driver IC, pinout, and electrical requirements before connecting it.
SKU: n/a - Dc-Dc Step Down, Power Modules, Power Supplies
XH-M407 XL4016E1 DC-to-DC Buck Voltage Regulator Module – 8A
Dc-Dc Step Down, Power Modules, Power SuppliesXH-M407 XL4016E1 DC-to-DC Buck Voltage Regulator Module – 8A
The XH-M407 Buck Converter uses an XL4016E1 regulator to reduce a DC supply to an adjustable lower output voltage. It is suitable for compatible electronics, robotics, and power-supply projects. The advertised 8A rating depends on cooling, voltage conversion, and board construction; confirm continuous-load capability for your application.
SKU: n/a
- Soldering & Spot Welding, Spot Welder
DH30 Portable Spot Welder Adjustable 30 Gears With 0.91 OLED Screen Spot Welding Machine In Pakistan
-6%Soldering & Spot Welding, Spot WelderDH30 Portable Spot Welder Adjustable 30 Gears With 0.91 OLED Screen Spot Welding Machine In Pakistan
About
- It has a 0.91-inch OLED screen.
- MAX 20 gears can now be installed, and MAX 0.2mm nickel steel belts can be welded.
- Touch the button panel to make adjustments more convenient.
- And you can see the input and output voltage and current on the screen.
- Added 0.91″ OLED screen, which can display data.
SKU: n/a
Best Sellers
Recently Added
Robotic Arm, Robotic Car, Robotics, Servo Motors
DS3218 20KG Metal Gear Servo Motor
The DS3218 20KG Servo Motor is a digital metal gear servo for robotic arms, grippers and RC steering. It uses a PWM control signal to move to a commanded position. Check whether you need the 180° or 270° version before ordering.
SKU: n/a
Converters, Programmers, Programmers & Microcontroller
ZK-PP1K PWM Signal Generator Module – Dual Mode, 1Hz–150kHz
Converters, Programmers, Programmers & Microcontroller
ZK-PP1K PWM Signal Generator Module – Dual Mode, 1Hz–150kHz
The ZK-PP1K PWM Signal Generator is a dual-mode module with an LCD and a 3.3V–30V DC supply range. Use PWM mode to adjust frequency and duty cycle, or switch to Pulse mode to set the output delay, high and low pulse widths, and pulse count.
SKU: n/a
Accessories, Robotic Car, Robotics
Mini Car Wheel 43mm for N20 DC Gear Motor
Build a compact robot car with this 43mm mini car wheel for N20 DC gear motors. It suits small chassis, line follower robots and student projects. Check that the wheel hub matches your motor’s output shaft before ordering.
SKU: n/a
ESP & IOT, Wifi Modules, Wireless & Communication, Wireless Modules
ESP32-S3-WROOM-1 N16R8 44-Pin Development Board – Soldered Headers
ESP & IOT, Wifi Modules, Wireless & Communication, Wireless Modules
ESP32-S3-WROOM-1 N16R8 44-Pin Development Board – Soldered Headers
The ESP32-S3 N16R8 is a 44-pin development board with pre-soldered headers. Its ESP32-S3-WROOM-1 module provides 16 MB flash, 8 MB PSRAM, 2.4 GHz Wi-Fi, and Bluetooth 5 Low Energy. Use it for wireless sensors, robotics, and embedded display projects.
SKU: n/a
LCD, LCD Display & Lights
2.8-Inch SPI TFT Display Module 240×320 – Non-Touch
The 2.8 Inch SPI TFT Display provides a 240×320-pixel colour screen for compatible microcontroller projects. Its SPI interface supports display communication, while the non-touch design suits interfaces controlled by buttons, keypads, or rotary encoders. Confirm the display driver IC, pinout, and electrical requirements before connecting it.
SKU: n/a
Dc-Dc Step Down, Power Modules, Power Supplies
XH-M407 XL4016E1 DC-to-DC Buck Voltage Regulator Module – 8A
Dc-Dc Step Down, Power Modules, Power Supplies
XH-M407 XL4016E1 DC-to-DC Buck Voltage Regulator Module – 8A
The XH-M407 Buck Converter uses an XL4016E1 regulator to reduce a DC supply to an adjustable lower output voltage. It is suitable for compatible electronics, robotics, and power-supply projects. The advertised 8A rating depends on cooling, voltage conversion, and board construction; confirm continuous-load capability for your application.
SKU: n/a
LEGO & STEM Kits
Tracked Robot Chassis – Tank-Track Base for Robotics Projects
The Tracked Robot Chassis provides a tank-track base for building a custom mobile robot. Use it as the starting platform for student projects, obstacle-navigation experiments, and mini sumo prototypes. Add a suitable controller, motor driver, power supply, and sensors according to your design. Confirm dimensions, weight, and included components before ordering.
SKU: n/a
ESP & IOT, Wifi Modules, Wireless & Communication, Wireless Modules
ESP32-C5 Development Board – 30-Pin, 4MB Flash, Dual USB-C, Dual-Band WiFi 6 & BLE
ESP & IOT, Wifi Modules, Wireless & Communication, Wireless Modules
ESP32-C5 Development Board – 30-Pin, 4MB Flash, Dual USB-C, Dual-Band WiFi 6 & BLE
The ESP32-C5 Development Board combines dual-band 2.4GHz and 5GHz WiFi 6 with Bluetooth Low Energy for connected electronics projects. This variant features a 30-pin layout, 4MB flash, and two USB-C connectors. It is suitable for sensor monitoring, automation prototypes, and wireless development. Check the supplied board’s pinout and USB-port functions before connecting accessories.
SKU: n/a
Power Modules & Batteries
3.7V 18650 Rechargeable Battery 2000mAh 7.4Wh – New in Pakistan
This new 18650 Battery 2000mAh is a rechargeable lithium-ion cell with a nominal voltage of 3.7V and a listed energy capacity of 7.4Wh. It provides a replaceable power source for compatible electronics and project builds. Match the cell’s terminal style, dimensions, and discharge rating to your application.
SKU: n/a
Power Modules & Batteries
3.7V 1S 550mAh Rechargeable LiPo Battery
The 550mAh LiPo Battery is a rechargeable lithium polymer battery with a nominal voltage of 3.7V and a single-cell configuration (1S). It is an option for compatible portable electronics, educational models, and DIY projects. Check battery dimensions, connector polarity, and current requirements before selecting it for your device.
SKU: n/a
Dc Motors, Robotics
N30 Micro Metal Gear DC Motor 6V 40 RPM (USED) Pull Out
This Used N30 Gear Motor is a pull-out micro DC motor with a metal gearbox, a rated voltage of 6V, and a listed speed of 40 RPM. Its compact size suits small mechanisms, robotics experiments, and student projects. As a used component removed from equipment, its appearance and wear may vary between units.
SKU: n/a
Cables, Connectors & Cables
USB Type-C to Type-C Cable 1 Meter
The USB C to C Cable features USB Type-C connectors at both ends and a 1-meter length. Use it to connect compatible devices to a USB-C power source. Charging performance depends on the cable’s rating, charger, and connected device.
SKU: n/a
Battery Charger, Power Modules & Batteries
4 Slot 18650 Li-ion Battery Smart Charger 4.2V in Pakistan
Battery Charger, Power Modules & Batteries
4 Slot 18650 Li-ion Battery Smart Charger 4.2V in Pakistan
The 4 Slot 18650 Battery Charger provides four positions for charging compatible rechargeable lithium-ion cells with a specified 4.2V charge limit. Use it with supported 18650 batteries after checking the charger’s input requirements, charging current, and accepted cell dimensions
SKU: n/a
Cables, Connectors, Connectors & Cables
DC Female Connector 5.5×2.1mm with 20cm Wire in Pakistan
The DC Female Connector 5.5×2.1mm with 20cm wire provides a socket connection for a matching male DC barrel plug. Use the attached lead to integrate a power input into compatible project wiring or replace a matching connection. Confirm polarity, wire gauge, and electrical ratings before use.
SKU: n/a
Cables, Connectors, Connectors & Cables
DC Male Barrel Connector 5.5×2.1mm in Pakistan
The DC Male Connector 5.5×2.1mm is a barrel-style plug for compatible DC power connections. Its listed dimensions are a 5.5mm outer barrel diameter and a 2.1mm inner opening. Check the mating socket, barrel length, polarity, and electrical ratings before installation.
SKU: n/a
Connectors, Connectors & Cables
2 Point Quick Wire Connector – Spring Clamp Terminal Block
The 2 Point Quick Wire Connector uses spring-clamp contacts to secure compatible conductors. It provides a convenient connection method for suitable project wiring and cable assemblies. Check the internal contact arrangement, supported wire types, conductor size, and electrical ratings before installation.
SKU: n/a
Sensors
FNIRSI CTG-20 Coating Thickness Gauge Car Paint Tester
Pickup available at Mekatroniks
Usually ready in 2 hours for Pickup
The FNIRSI CTG-20 Coating Thickness Gauge measures suitable coatings on supported metal surfaces without removing the coating. Use it for vehicle paint comparisons, workshop inspections, and coating checks. It offers a 0–1400µm range, automatic substrate identification, and single or continuous measurement modes.
SKU: n/a
Soldering & Spot Welding, Soldering station
FNIRSI DWS-200 F210 Soldering Station | Mekatroniks
The FNIRSI DWS-200 Soldering Station with F210 handle provides adjustable temperature control from 100°C to 450°C. Use it for suitable PCB assembly, component soldering, and electronics repairs. The station has a maximum rated power of 200W; actual power depends on the connected handle, tip, and operating conditions.
SKU: n/a
- Amp Meters, Instruments & Tools, Meters, Multimeters, Volt & Amp Meters, Volt Meters
DC Volt Amp Meter DC 100V 10A Voltmeter DSN-VC288
Amp Meters, Instruments & Tools, Meters, Multimeters, Volt & Amp Meters, Volt MetersDC Volt Amp Meter DC 100V 10A Voltmeter DSN-VC288
About this item
- Type: Voltmeter & Ammeter 2 in 1 Tester, Voltage Measuring Range: DC 0.0V-100V, Current Measuring Range: DC 0-10A
- 2 Color LED Display: Adopting three 0.28″ LED digital tube, red + blue dual voltage and current display, automatically moving, bright and clear, convenient for you to check the measured result.
- Function: Can display voltage and current at the same time in such a small size, all-cover shell, safe, reliable and dustproof, with reverse connection protection, high precision, high reliability, for high-end applications.
- Easy to Use: Come with 2 x cables which are easy to connect.
SKU: n/a - Arduino & Components, Arduino Shields, Instruments & Tools, Motor Drivers
L293D Motor Driver Shield/Expansion Board For UNO R3
Arduino & Components, Arduino Shields, Instruments & Tools, Motor DriversL293D Motor Driver Shield/Expansion Board For UNO R3
The L293D Motor Driver Shield is an expansion board for Arduino UNO R3 motor control projects. Use it to drive compatible small motors in robot cars, automation prototypes, and educational demonstrations. Check the shield version, motor current, and power supply requirements before connecting your hardware.
SKU: n/a
- Buck/Boost Modules, Dc-Dc Converters, Dc-Dc Step Down, Power Modules & Batteries
CA-1235 Adjustable Buck Converter Module in Pakistan
Buck/Boost Modules, Dc-Dc Converters, Dc-Dc Step Down, Power Modules & BatteriesCA-1235 Adjustable Buck Converter Module in Pakistan
About this item
CA-1235 Power supply converter module
INPUT DC 5V-15V
OUTPUT DC 1.25V / 1.5V / 1.8V / 2.5V / 3.3V / 5V
The power efficiency is up to 90% or more
3A current output
default output voltage1.25V
Supply Module Model CA-1235SKU: n/a - Power Modules & Batteries
NEW 18650 Battery Charge Able High Quality 2.55 Mah 3.7v
The 18650 Rechargeable Battery has a nominal voltage of 3.7V and is intended for compatible lithium-ion-powered equipment. Use it in suitable battery holders and electronics projects after confirming its capacity, discharge rating, terminal style, and protection features. Charge only with a compatible lithium-ion charger.
SKU: n/a
