No products in the basket.
Special Offer
- Displays
4 Digit Red 7-Segment LED Display CA – 50MM Common Anode
The 4 Digit Red LED Display CA 50MM is a common anode seven-segment display for numeric readouts. Use it in DIY clocks, timers, counters and microcontroller projects with suitable driver circuitry. Verify the pinout, physical dimensions and electrical ratings before installation.
SKU: n/a - Sensors
INA129-HT Precision Low-Power Instrumentation Amplifier Module Board
The INA129-HT Amplifier Module is intended for precision amplification of small differential sensor signals. It can support bridge measurement circuits, analogue signal conditioning and data acquisition projects with suitable supporting circuitry. Confirm the board’s supply requirements, gain configuration and operating temperature before use.
SKU: n/a - Smart Home
WiFi Temperature & Humidity Sensor
Monitor your surroundings with the WiFi Temperature and Humidity Sensor. This device combines temperature and humidity sensing with WiFi connectivity, making it a practical option for everyday environmental monitoring. Explore it at Mekatroniks Pakistan for your home, office or electronics workspace.
SKU: n/a - Smart Home
WiFi Mini Smart Switch 16A with Power Monitoring
WiFi Mini Smart Switch 16A adds remote switching and power monitoring to a compatible smart-home installation. Its compact design supports 2.4 GHz WiFi and loads within its rated current of up to 16A. Check your wiring, connected load and app compatibility before installation
SKU: n/a - Electronic Components
Rotary Potentiometer 3 Pin – Volume Control
Control volume or adjust resistance in your electronics project with this 3-pin rotary potentiometer. Its rotating shaft provides a simple way to make manual adjustments. Check the selected resistance value, shaft size, and circuit requirements before ordering.
SKU: n/a - Power Modules
PD 65W USB-C Buck Converter Module
The PD 65W USB-C Buck Converter Module converts a DC 12–30V input into USB-C Power Delivery output for compatible devices. Its compact design suits DIY power supplies, battery-powered builds and electronics prototypes. Output is rated up to 65W under suitable operating conditions.
SKU: n/a - Soldering Tools
Proskit Desoldering Pump – Solder Sucker
Proskit desoldering pump is a manual solder sucker for removing molten solder from PCB joints. Use it alongside a soldering iron when replacing through-hole components, clearing solder from connections or carrying out electronics repair.
SKU: n/a
- Soldering & Spot Welding, Spot Welder
DH30 Portable Spot Welder Adjustable 30 Gears With 0.91 OLED Screen Spot Welding Machine In Pakistan
-6%
Soldering & Spot Welding, Spot WelderDH30 Portable Spot Welder Adjustable 30 Gears With 0.91 OLED Screen Spot Welding Machine In Pakistan
About
- It has a 0.91-inch OLED screen.
- MAX 20 gears can now be installed, and MAX 0.2mm nickel steel belts can be welded.
- Touch the button panel to make adjustments more convenient.
- And you can see the input and output voltage and current on the screen.
- Added 0.91″ OLED screen, which can display data.
SKU: n/a
Best Sellers
Recently Added
Displays
4 Digit Red 7-Segment LED Display CA – 50MM Common Anode
The 4 Digit Red LED Display CA 50MM is a common anode seven-segment display for numeric readouts. Use it in DIY clocks, timers, counters and microcontroller projects with suitable driver circuitry. Verify the pinout, physical dimensions and electrical ratings before installation.
SKU: n/a
Sensors
INA129-HT Precision Low-Power Instrumentation Amplifier Module Board
The INA129-HT Amplifier Module is intended for precision amplification of small differential sensor signals. It can support bridge measurement circuits, analogue signal conditioning and data acquisition projects with suitable supporting circuitry. Confirm the board’s supply requirements, gain configuration and operating temperature before use.
SKU: n/a
Smart Home
WiFi Temperature & Humidity Sensor
Monitor your surroundings with the WiFi Temperature and Humidity Sensor. This device combines temperature and humidity sensing with WiFi connectivity, making it a practical option for everyday environmental monitoring. Explore it at Mekatroniks Pakistan for your home, office or electronics workspace.
SKU: n/a
Smart Home
WiFi Mini Smart Switch 16A with Power Monitoring
WiFi Mini Smart Switch 16A adds remote switching and power monitoring to a compatible smart-home installation. Its compact design supports 2.4 GHz WiFi and loads within its rated current of up to 16A. Check your wiring, connected load and app compatibility before installation
SKU: n/a
Electronic Components
Rotary Potentiometer 3 Pin – Volume Control
Control volume or adjust resistance in your electronics project with this 3-pin rotary potentiometer. Its rotating shaft provides a simple way to make manual adjustments. Check the selected resistance value, shaft size, and circuit requirements before ordering.
SKU: n/a
Power Modules
PD 65W USB-C Buck Converter Module
The PD 65W USB-C Buck Converter Module converts a DC 12–30V input into USB-C Power Delivery output for compatible devices. Its compact design suits DIY power supplies, battery-powered builds and electronics prototypes. Output is rated up to 65W under suitable operating conditions.
SKU: n/a
Soldering Tools
Proskit Desoldering Pump – Solder Sucker
Proskit desoldering pump is a manual solder sucker for removing molten solder from PCB joints. Use it alongside a soldering iron when replacing through-hole components, clearing solder from connections or carrying out electronics repair.
SKU: n/a
Power Modules
DC 12-30V to 5V 5A Buck Converter Module
Add USB Power Delivery charging to your electronics project with this 65W PD fast charging module. It accepts DC 12–30V input and offers up to 65W output under suitable operating conditions. Use it with compatible devices, a suitable power supply and an appropriately rated cable.
Input voltage: DC 12–30V
Maximum advertised output: 65W
Charging protocol: USB Power Delivery (PD)
Applications: DIY chargers, electronics prototypes and custom charging stations
Actual charging power depends on the input supply, supported output profiles, cable and connected device.
SKU: n/a
Motor Drivers
500W BLDC Motor Driver with Hall Sensor
Control a compatible brushless DC motor with this 500W BLDC motor driver with Hall sensor support. Designed for motor control projects that use Hall feedback, it is a practical component for electronics development, educational builds and DIY systems.
Power class: 500W
Motor type: Compatible brushless DC motor
Feedback: Hall sensor support
Applications: Motor control experiments, prototypes and educational projects
Match the driver’s voltage, current limits and wiring requirements to your motor before use.
SKU: n/a
Displays
3.5 Inch SPI TFT LCD Display 480×320 – Non-Touch
Add visual output to your electronics project with this 3.5 inch SPI TFT LCD. Featuring 480 × 320 resolution and a non-touch screen, it can display text, graphics, menus and sensor readings when connected to compatible hardware and software. Available from Mekatroniks for DIY electronics and embedded projects in Pakistan.
Display size: 3.5 inches
Resolution: 480 × 320 pixels
Display technology: TFT LCD
Communication interface: SPI
Touch support: No
SKU: n/a
Displays
GC9A01 1.28 Inch Round TFT LCD Display – 240×240 SPI
Add a circular screen to your project with the GC9A01 round TFT display. This 1.28-inch LCD module features a 240×240 resolution and SPI interface for displaying text, icons and graphics. Use it to create digital clocks, sensor dashboards, circular gauges and custom electronics interfaces
SKU: n/a
Power Modules & Batteries
LiPo battery 5200mAh 11.1V 50C 3S Li-Po 3 cell With XT60
5200mAh 11.1V 50C 3S LiPo battery designed for compatible DJI quadcopters, RC drones and other 3-cell LiPo applications. Its 5200mAh capacity and 50C discharge rating provide a practical combination of capacity and power for demanding RC applications.
SKU: n/a
- Amp Meters, Instruments & Tools, Meters, Multimeters, Volt & Amp Meters, Volt Meters
DC Volt Amp Meter DC 100V 10A Voltmeter DSN-VC288
Amp Meters, Instruments & Tools, Meters, Multimeters, Volt & Amp Meters, Volt MetersDC Volt Amp Meter DC 100V 10A Voltmeter DSN-VC288
About this item
- Type: Voltmeter & Ammeter 2 in 1 Tester, Voltage Measuring Range: DC 0.0V-100V, Current Measuring Range: DC 0-10A
- 2 Color LED Display: Adopting three 0.28″ LED digital tube, red + blue dual voltage and current display, automatically moving, bright and clear, convenient for you to check the measured result.
- Function: Can display voltage and current at the same time in such a small size, all-cover shell, safe, reliable and dustproof, with reverse connection protection, high precision, high reliability, for high-end applications.
- Easy to Use: Come with 2 x cables which are easy to connect.
SKU: n/a
- Buck/Boost Modules, Dc-Dc Converters, Dc-Dc Step Down, Power Modules & Batteries
CA-1235 Adjustable Buck Converter Module in Pakistan
Buck/Boost Modules, Dc-Dc Converters, Dc-Dc Step Down, Power Modules & BatteriesCA-1235 Adjustable Buck Converter Module in Pakistan
 About this item
CA-1235 Power supply converter module
INPUT DC 5V-15V
OUTPUT DC 1.25V / 1.5V / 1.8V / 2.5V / 3.3V / 5V
The power efficiency is up to 90% or more
3A current output
default output voltage1.25V
Supply Module Model CA-1235SKU: n/a
