No products in the basket.
Special Offer
- Power Modules & Batteries
3.7V 1S 550mAh Rechargeable LiPo Battery
The 550mAh LiPo Battery is a rechargeable lithium polymer battery with a nominal voltage of 3.7V and a single-cell configuration (1S). It is an option for compatible portable electronics, educational models, and DIY projects. Check battery dimensions, connector polarity, and current requirements before selecting it for your device.
SKU: n/a - Dc Motors, Robotics
N30 Micro Metal Gear DC Motor 6V 40 RPM (USED) Pull Out
This Used N30 Gear Motor is a pull-out micro DC motor with a metal gearbox, a rated voltage of 6V, and a listed speed of 40 RPM. Its compact size suits small mechanisms, robotics experiments, and student projects. As a used component removed from equipment, its appearance and wear may vary between units.
SKU: n/a - Cables, Connectors & Cables
USB Type-C to Type-C Cable 1 Meter
The USB C to C Cable features USB Type-C connectors at both ends and a 1-meter length. Use it to connect compatible devices to a USB-C power source. Charging performance depends on the cable’s rating, charger, and connected device.
SKU: n/a - Battery Charger, Power Modules & Batteries
4 Slot 18650 Li-ion Battery Smart Charger 4.2V in Pakistan
Battery Charger, Power Modules & Batteries4 Slot 18650 Li-ion Battery Smart Charger 4.2V in Pakistan
The 4 Slot 18650 Battery Charger provides four positions for charging compatible rechargeable lithium-ion cells with a specified 4.2V charge limit. Use it with supported 18650 batteries after checking the charger’s input requirements, charging current, and accepted cell dimensions
SKU: n/a - Cables, Connectors, Connectors & Cables
DC Female Connector 5.5×2.1mm with 20cm Wire in Pakistan
The DC Female Connector 5.5×2.1mm with 20cm wire provides a socket connection for a matching male DC barrel plug. Use the attached lead to integrate a power input into compatible project wiring or replace a matching connection. Confirm polarity, wire gauge, and electrical ratings before use.
SKU: n/a - Cables, Connectors, Connectors & Cables
DC Male Barrel Connector 5.5×2.1mm in Pakistan
The DC Male Connector 5.5×2.1mm is a barrel-style plug for compatible DC power connections. Its listed dimensions are a 5.5mm outer barrel diameter and a 2.1mm inner opening. Check the mating socket, barrel length, polarity, and electrical ratings before installation.
SKU: n/a - Connectors, Connectors & Cables
2 Point Quick Wire Connector – Spring Clamp Terminal Block
The 2 Point Quick Wire Connector uses spring-clamp contacts to secure compatible conductors. It provides a convenient connection method for suitable project wiring and cable assemblies. Check the internal contact arrangement, supported wire types, conductor size, and electrical ratings before installation.
SKU: n/a - Sensors
FNIRSI CTG-20 Coating Thickness Gauge Car Paint Tester
Pickup available at Mekatroniks
Usually ready in 2 hours for Pickup
The FNIRSI CTG-20 Coating Thickness Gauge measures suitable coatings on supported metal surfaces without removing the coating. Use it for vehicle paint comparisons, workshop inspections, and coating checks. It offers a 0–1400µm range, automatic substrate identification, and single or continuous measurement modes.
SKU: n/a
- Soldering & Spot Welding, Spot Welder
DH30 Portable Spot Welder Adjustable 30 Gears With 0.91 OLED Screen Spot Welding Machine In Pakistan
-6%Soldering & Spot Welding, Spot WelderDH30 Portable Spot Welder Adjustable 30 Gears With 0.91 OLED Screen Spot Welding Machine In Pakistan
About
- It has a 0.91-inch OLED screen.
- MAX 20 gears can now be installed, and MAX 0.2mm nickel steel belts can be welded.
- Touch the button panel to make adjustments more convenient.
- And you can see the input and output voltage and current on the screen.
- Added 0.91″ OLED screen, which can display data.
SKU: n/a
Best Sellers
Recently Added
Power Modules & Batteries
3.7V 1S 550mAh Rechargeable LiPo Battery
The 550mAh LiPo Battery is a rechargeable lithium polymer battery with a nominal voltage of 3.7V and a single-cell configuration (1S). It is an option for compatible portable electronics, educational models, and DIY projects. Check battery dimensions, connector polarity, and current requirements before selecting it for your device.
SKU: n/a
Dc Motors, Robotics
N30 Micro Metal Gear DC Motor 6V 40 RPM (USED) Pull Out
This Used N30 Gear Motor is a pull-out micro DC motor with a metal gearbox, a rated voltage of 6V, and a listed speed of 40 RPM. Its compact size suits small mechanisms, robotics experiments, and student projects. As a used component removed from equipment, its appearance and wear may vary between units.
SKU: n/a
Cables, Connectors & Cables
USB Type-C to Type-C Cable 1 Meter
The USB C to C Cable features USB Type-C connectors at both ends and a 1-meter length. Use it to connect compatible devices to a USB-C power source. Charging performance depends on the cable’s rating, charger, and connected device.
SKU: n/a
Battery Charger, Power Modules & Batteries
4 Slot 18650 Li-ion Battery Smart Charger 4.2V in Pakistan
Battery Charger, Power Modules & Batteries
4 Slot 18650 Li-ion Battery Smart Charger 4.2V in Pakistan
The 4 Slot 18650 Battery Charger provides four positions for charging compatible rechargeable lithium-ion cells with a specified 4.2V charge limit. Use it with supported 18650 batteries after checking the charger’s input requirements, charging current, and accepted cell dimensions
SKU: n/a
Cables, Connectors, Connectors & Cables
DC Female Connector 5.5×2.1mm with 20cm Wire in Pakistan
The DC Female Connector 5.5×2.1mm with 20cm wire provides a socket connection for a matching male DC barrel plug. Use the attached lead to integrate a power input into compatible project wiring or replace a matching connection. Confirm polarity, wire gauge, and electrical ratings before use.
SKU: n/a
Cables, Connectors, Connectors & Cables
DC Male Barrel Connector 5.5×2.1mm in Pakistan
The DC Male Connector 5.5×2.1mm is a barrel-style plug for compatible DC power connections. Its listed dimensions are a 5.5mm outer barrel diameter and a 2.1mm inner opening. Check the mating socket, barrel length, polarity, and electrical ratings before installation.
SKU: n/a
Connectors, Connectors & Cables
2 Point Quick Wire Connector – Spring Clamp Terminal Block
The 2 Point Quick Wire Connector uses spring-clamp contacts to secure compatible conductors. It provides a convenient connection method for suitable project wiring and cable assemblies. Check the internal contact arrangement, supported wire types, conductor size, and electrical ratings before installation.
SKU: n/a
Sensors
FNIRSI CTG-20 Coating Thickness Gauge Car Paint Tester
Pickup available at Mekatroniks
Usually ready in 2 hours for Pickup
The FNIRSI CTG-20 Coating Thickness Gauge measures suitable coatings on supported metal surfaces without removing the coating. Use it for vehicle paint comparisons, workshop inspections, and coating checks. It offers a 0–1400µm range, automatic substrate identification, and single or continuous measurement modes.
SKU: n/a
Soldering & Spot Welding, Soldering station
FNIRSI DWS-200 F210 Soldering Station | Mekatroniks
The FNIRSI DWS-200 Soldering Station with F210 handle provides adjustable temperature control from 100°C to 450°C. Use it for suitable PCB assembly, component soldering, and electronics repairs. The station has a maximum rated power of 200W; actual power depends on the connected handle, tip, and operating conditions.
SKU: n/a
Accessories
Panel Mount Fuse Holder for 6×30mm Glass Fuse in Pakistan
This Panel Mount Fuse Holder accommodates a compatible 6×30mm glass cartridge fuse. It provides a mounting point for incorporating a replaceable fuse into an equipment panel or enclosure. Confirm the holder’s electrical ratings, panel cutout, and terminal style before installation.
SKU: n/a
Accessories
1A Fast Blow Glass Fuse 250V – 6×30mm in Pakistan
The 1A Fast Blow Glass Fuse is a 6×30mm cartridge fuse with a listed 250V rating. It provides overcurrent protection in equipment designed for this fuse specification. Match the current rating, voltage type, breaking capacity, dimensions, and operating characteristic before replacement.
SKU: n/a
Switches & Button
Mini 2 Pin Flashlight Push Button Switch 1A 30V DC
The Mini Flashlight Push Button Switch is a compact, two-terminal component for compatible torch repairs and electronics projects. Its listed rating is 1A at 30V DC. Check the dimensions, switching action, and mounting arrangement to ensure it matches your application.
SKU: n/a
Switches & Button
6 Pin Push Lock Button Switch 7×7mm – DPDT PCB Mount
The 6 Pin Push Lock Button Switch features a DPDT contact arrangement and PCB-mount design. Its latching action holds the selected position after pressing, then changes position with the next press. The listed 7×7mm size suits compact layouts when the footprint matches your PCB.
SKU: n/a
Switches & Button
Small Momentary Push Button Switch Push to ON in Pakistan
This small Momentary Push Button Switch closes the connection while you press it and returns to its normally open state when released. Use it for temporary inputs in compatible control circuits, prototypes, and student projects. Confirm the pin layout and electrical ratings before connecting it.
SKU: n/a
Power Modules & Batteries
4000mAh 3.7V Lithium Ion Battery – 9.5 × 54 × 65mm
The 4000mAh 3.7V Lithium Ion Battery is a rechargeable power source for compatible electronic devices and projects. Its listed dimensions are 9.5 × 54 × 65mm. Confirm the charging requirements, discharge rating, protection circuit, and connector polarity before installation.
SKU: n/a
Sensors
38kHz IR Receiver 3 Pin for Arduino
The 38kHz IR Receiver detects signals from compatible infrared remote controls. Its three connections provide power, ground, and signal output for use with a suitable controller. Add remote control input to Arduino projects after confirming the receiver’s pinout, voltage requirements, and supported remote protocol.
SKU: n/a
Displays
LCD 12864 Graphic LCD Display Module 128×64 – Blue
The LCD 12864 Graphic Display provides a 128×64-pixel screen with a blue display appearance. Use it to show text, numerical readings, icons, and simple graphics in compatible electronics projects. Confirm the controller chip, interface, voltage, and pinout before selecting a library or connecting the module.
SKU: n/a
Connectors & Cables
3mm Heat Shrink Sleeve 1 Meter
The 3mm Heat Shrink Sleeve comes in a 1-metre length that you can cut to suit individual connections. Use it to cover suitable wire joints and exposed conductors in electronics projects. Confirm the unshrunk diameter, shrink ratio, and insulation ratings before use.
SKU: n/a
Connectors & Cables
1mm Heat Shrink Sleeve 1 Meter
The 1mm Heat Shrink Sleeve is supplied in a 1-metre length for cutting into individual pieces. Use it to cover suitable fine wire joints and exposed connections in electronics projects. Check the tubing’s diameter, shrink ratio, and insulation ratings before use.
SKU: n/a
Connectors & Cables
2mm Heat Shrink Sleeve 1 Meter
The 2mm Heat Shrink Sleeve is supplied in a 1-metre length that you can cut to suit your project. Use it to cover suitable wire joints and exposed connections. Check the sleeve’s supplied diameter, shrink ratio, and temperature rating before selecting it for your wiring.
SKU: n/a
- Amp Meters, Instruments & Tools, Meters, Multimeters, Volt & Amp Meters, Volt Meters
DC Volt Amp Meter DC 100V 10A Voltmeter DSN-VC288
Amp Meters, Instruments & Tools, Meters, Multimeters, Volt & Amp Meters, Volt MetersDC Volt Amp Meter DC 100V 10A Voltmeter DSN-VC288
About this item
- Type: Voltmeter & Ammeter 2 in 1 Tester, Voltage Measuring Range: DC 0.0V-100V, Current Measuring Range: DC 0-10A
- 2 Color LED Display: Adopting three 0.28″ LED digital tube, red + blue dual voltage and current display, automatically moving, bright and clear, convenient for you to check the measured result.
- Function: Can display voltage and current at the same time in such a small size, all-cover shell, safe, reliable and dustproof, with reverse connection protection, high precision, high reliability, for high-end applications.
- Easy to Use: Come with 2 x cables which are easy to connect.
SKU: n/a - Arduino & Components, Arduino Shields, Instruments & Tools, Motor Drivers
L293D Motor Driver Shield/Expansion Board For UNO R3
Arduino & Components, Arduino Shields, Instruments & Tools, Motor DriversL293D Motor Driver Shield/Expansion Board For UNO R3
The L293D Motor Driver Shield is an expansion board for Arduino UNO R3 motor control projects. Use it to drive compatible small motors in robot cars, automation prototypes, and educational demonstrations. Check the shield version, motor current, and power supply requirements before connecting your hardware.
SKU: n/a
- Buck/Boost Modules, Dc-Dc Converters, Dc-Dc Step Down, Power Modules & Batteries
CA-1235 Adjustable Buck Converter Module in Pakistan
Buck/Boost Modules, Dc-Dc Converters, Dc-Dc Step Down, Power Modules & BatteriesCA-1235 Adjustable Buck Converter Module in Pakistan
About this item
CA-1235 Power supply converter module
INPUT DC 5V-15V
OUTPUT DC 1.25V / 1.5V / 1.8V / 2.5V / 3.3V / 5V
The power efficiency is up to 90% or more
3A current output
default output voltage1.25V
Supply Module Model CA-1235SKU: n/a - Power Modules & Batteries
NEW 18650 Battery Charge Able High Quality 2.55 Mah 3.7v
The 18650 Rechargeable Battery has a nominal voltage of 3.7V and is intended for compatible lithium-ion-powered equipment. Use it in suitable battery holders and electronics projects after confirming its capacity, discharge rating, terminal style, and protection features. Charge only with a compatible lithium-ion charger.
SKU: n/a
